TKK Pu Fix INSULATION ADHESIVE
Polyurethane adhesive for fixing thermal insulation boards on walls, facades, and foundations
One-component, low-expansion polyurethane adhesive is purpose-designed for bonding thermal insulation boards on various construction surfaces, it is also suitable for filling openings between boards. Hardens with air humidity. Hardened adhesive ensures a strong bond and features good insulation properties.
STIR 10
Technical Parameters
– Sanding: From 0-1.0 mm.
– Dry mass density: 1500-1900 kg/m³
– Norm: MKC EN ETAG 004, ETA-11/0340
– Work temperatures: +5°C – +30°C.
– Mixing with water: approximately 4 min., with around 26-28% water/25kg.
– Working time in container: Up to 4 hours after mixing.
– Spending: for panel adhesion 4-5 kg/m²; for covering panels with reinforcing mesh 4-5 kg/m²
– Adhesion (separation) from the layers of concrete: After 28 days 0.3 N/mm²
– Adhesion (separation) from the layers of polystyrene: After 28 days 0.08 N/mm²
– Material color: Grey.
– Packaging: 25 kg.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
Aquastop AB 35/G
2C Waterproofing mass
Application
A two-component measure of elastic waterproofing of waterproofing.
Thickness up to 3 mm.
Based on cement (comp. A) and resin (comp. B).
For concrete or porous cement mortar walls, horizontal or vertical.
In outdoor and indoor environments.
For swimming pools, underground structures, water tanks,
terraces, balconies, bathrooms, etc.
High elasticity and good adhesion even on smooth surfaces.
Surfaces must be clean, dry, hard, dust-free and grease-free.
It is applied with a brush or roller, in two or three layers.
For thicker and reinforced layers over 2 mm with glass mesh
the submitted side of the shovel, and as a final layer with
PEVALIT-Aquastop AB30 R with brush or roller.
The interval between layers is 4-6 hours.
Aquastop AB 30R
Technical Parameters
Shelf life: up to 1 hour after mixing.
Operating temperatures: +5°C- +30°C.
Resistant to temperatures: -20°C – +80°C.
Standard: based on EN 14891:2012.
Interval between layers: 4-6 hours.
Exposure to water: After 4 days.
Packaging: 20 + 8 kg. / 5 +2 kg.
Material color: gray.
Shelf life: 12 months in original packaging,in a moisture-free warehouse.
