Masat veterrafshuese N Bs
Parametrat teknik
-Dendësia e masës së thatë të papërpunuar: 1830 kg/1m³.
-Fortësia ndaj presionit (pas 28 ditësh): CS IV, ca. 8.0 N/mm².
-Thithja e ujit: W0.
-Temperaturat për punim: +5°C - +30°C
-Koha e punimit në enë: Deri 15 minuta pas përzierjes.
-Trashësia e shtresës: Prej 6 deri 30 mm.
-Përzierja me ujë: Мe rreth 6.3 l/25kg.
-Ngjyra e materialit: Gri
-Paketimi: 25 kg.
-Afati i magazinimit: Në paketim origjinal 12muaj, në depo pa lagështi.
Pevalit Fuga mass F bs
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 20 minutes.
– Work temperatures: +5°C – +30°C.
– Resistant to temperatures: -20°C – +80°C.
– Norm: SG2, based on EN 13888.
– Walking on tiles: After 8 hours.
– Mixing with water: approximately 4 min., with around 0.55 1/2kg.
– Packaging: 2 and 5 kg.
– Material color: According to catalogue.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
Pevalit Fuga mass
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 20 minutes.
– Work temperatures: +5°C – +30°C.
– Resistant to temperatures: -20°C – +80°C.
– Norm: SG2, based on EN 13888.
– Walking on tiles: After 8 hours.
– Mixing with water: approximately 4 min., with around 0.53 l / 2kg.
– Packaging: 2 and 5 kg.
– Material color: According to catalogue.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P XS
Technical Parameters
– Working time in container: Up to 15 minutes after mixing.
– Working time: Up to 10 minutes.
– Work temperatures: +15°C – +30°C.
– Resistant to temperatures: -35°C – +100°C.
– Norm: C2FT, based on EN 12004.
– Walking on tiles: After 3-6 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 6 hours.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: White.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P3w S1
Technical Parameters
-Working time in container: Up to 2 hours after mixing.
-Working time: Up to 30 minutes.
-Work temperatures: +5°C – +30°C
– Resistant to temperatures: -30°C – +100°C
– Norm: C2FE – S1, based on EN 12004.
– Walking on tiles: After 4-6 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: White.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P3 W g&m
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 30 minutes.
– Work temperatures: +5°C – +30°C
– Resistant to temperatures: -30°C – +100°C
– Norm: C2FE, based on EN 12004.
– Walking on tiles: After 24 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: White.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P3 S1
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 30 minutes.
– Work temperatures: +5°C – +30°C
– Resistant to temperatures: -30°C – +100°C
– Norm: C2FE – S1, based on EN 12004.
– Walking on tiles: After 12-16 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: Grey.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
