Mase veterrafshuese N XS e shpejte
Parametrat teknik
-Dendësia e masës së thatë të papërpunuar: 1900 kg/1m³.
-Fortësia ndaj presionit (pas 28 ditësh): CS IV, ca. 8.0 N/mm².
-Thithja e ujit: W0.
-Temperaturat për punim: +5°C – +30°C
-Koha e punimit në enë: Deri 15 minuta pas përzierjes.
-Trashësia e shtresës: Prej 6 deri 30 mm.
-Përzierja me ujë: Мe rreth 6.3 l/25kg.
-Ngjyra e materialit: Gri
-Paketimi: 25 kg.
-Afati i magazinimit: Në paketim origjinal 12muaj, në depo pa lagështi.
Category: Materiale per pllaka
Description
Aplikimi
-Material i modifikuar për ngurtësim të shpejtë pas përdorimit, për rrafshimin e shtresave jo të rrafshta, apo nivelimin e dy shtresave jo të barabarta.
-Si shtresë paraprake për vendosjen e shtresave finale në dysheme si pllaka, parket, PVC, tepison ose mbulim të dyshemesë me ngjyra industriale.
-Trashësia e shtresës prej 3 deri 30 mm.
-Aplikohet mbi shtresa të betonit , betonit të thatë apo të lagët, dysheme me nxemje qëndrore, mbi pllaka të vjetra nga qeramika, graniti, mermeri, porcelani etj.
-Përdorim në ambientëtë jashtme dhe të brendshme.
-Sipërfaqet ku aplikohet NIVOMAS-a N XS duhet të jenë të forta, të pastra, pa pluhur dhe pa yndyrë.
-Shtresat që absorbojnë shumë ujë (poroze), si betoni apo betoni i thatë, paraprakisht i lyejmë me lëng lidhës hidrofobik.
-Gjatë aplikimit të materialit nuk duhet të ketë ndërprerje të punimeve dhe materiali nuk duhet të bie në kontakt me muret.
Additional information
| Weight | 25 kg |
|---|---|
| Materiale per pllaka |
Materiale tjera |
Reviews (0)
Be the first to review “Mase veterrafshuese N XS e shpejte” Cancel reply
You must be logged in to post a review.
Shipping and Delivery
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Pevalit Fuga mass
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 20 minutes.
– Work temperatures: +5°C – +30°C.
– Resistant to temperatures: -20°C – +80°C.
– Norm: SG2, based on EN 13888.
– Walking on tiles: After 8 hours.
– Mixing with water: approximately 4 min., with around 0.53 l / 2kg.
– Packaging: 2 and 5 kg.
– Material color: According to catalogue.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P3w S1
Technical Parameters
-Working time in container: Up to 2 hours after mixing.
-Working time: Up to 30 minutes.
-Work temperatures: +5°C – +30°C
– Resistant to temperatures: -30°C – +100°C
– Norm: C2FE – S1, based on EN 12004.
– Walking on tiles: After 4-6 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: White.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P3 S1
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 30 minutes.
– Work temperatures: +5°C – +30°C
– Resistant to temperatures: -30°C – +100°C
– Norm: C2FE – S1, based on EN 12004.
– Walking on tiles: After 12-16 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: Grey.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
Pevalit P2 S1
FLEXIBLE ADHESIVE
Application
-For surfaces of outdoor and indoor environments, for example terraces, balconies, facades, etc.
-Tile aandsion over layers of flooring with central heating system.
-Used for porcelain tile aandsion, artificial granite, concrete tiles, stone, ceramics, etc.
-Extruded polyurethane (Styrodur) aandsion, in thermal insulation facades.
-Has good durability against high temperatures, frost and moisture.
-For use on walls and flooring.
-Used to repair damaged surfaces, with thickness up to 8 mm.
-Certified in C2TE-S1 class, according to norm EN 12004.
Pevalit P2
FLEXIBLE TILE ADHESIVE
Application
– For surfaces of outdoor and indoor environments, for example terraces, balconies, facades, etc.
– Tile aandsion over layers of flooring with central heating system.
– Used for porcelain tile aandsion, artificial granite, concrete tiles, stone, ceramics, etc.
– Extruded polyurethane (Styrodur) adhesion, in thermal insulation facades.
– Has good durability against high temperatures, frost and moisture.
– For use on walls and flooring.
– Used to repair damaged surfaces, with thickness up to 8 mm.
– Certified in C2TE class, according to norm EN 12004, Rap.No. P 920/05-410-5.
Pevalit P1 Extra
TILE ADHESIVE
Application
– Is distinguished with a greater timeframe for working and corrections, up to 30 minutes.
– Used for the adhesion of ceramic tiles, with larger weights and dimensions.
– On surfaces of walls or floors in indoors ambients.
– Certified with C1T class, According to EN 12004, Rap.No. P 920/05-410-4.

Reviews
There are no reviews yet.