Masat veterrafshuese N Bs
€16.25
Parametrat teknik
-Dendësia e masës së thatë të papërpunuar: 1830 kg/1m³.
-Fortësia ndaj presionit (pas 28 ditësh): CS IV, ca. 8.0 N/mm².
-Thithja e ujit: W0.
-Temperaturat për punim: +5°C – +30°C
-Koha e punimit në enë: Deri 15 minuta pas përzierjes.
-Trashësia e shtresës: Prej 6 deri 30 mm.
-Përzierja me ujë: Мe rreth 6.3 l/25kg.
-Ngjyra e materialit: Gri
-Paketimi: 25 kg.
-Afati i magazinimit: Në paketim origjinal 12muaj, në depo pa lagështi.
Aplikimi
-Material për rrafshimin e shtresave jo të rrafshta, apo nivelimin e dy shtresave jo të barabarta.
-Si shtresë paraprake për vendosjen e shtresave finale në dysheme si pllaka, parket, PVC, tepison ose mbulim të dyshemesë me ngjyra industriale.
-Trashesia e shtresës prej 6 deri 30 mm.
-Aplikohet mbi shtresa të betonit, betonit të thatë apo të lagët, dysheme me nxemje qëndrore, mbi pllaka të vjetra nga qeramika, graniti, mermeri, porcelani etj.
-Përdorim në ambiente të jashtme dhe të brendshme.
-Sipërfaqet ku aplikohet NIVOMAS-a N BS duhet të jenë të forta, të pastra, pa pluhur dhe pa yndyrë.
-Gjatë aplikimit të materialit nuk duhet të ketë ndërprerje të punimeve dhe materiali nuk duhet të bie në kontakt me muret.
-Shtresat që absorbojnë shumë ujë (poroze), si betoni apo betoni i thatë, paraprakisht i lyejmë me lëng lidhës hidrofobik.
| Weight | 25 kg |
|---|---|
| Materiale per pllaka | Materiale tjera |
You must be logged in to post a review.
PEVALIT was established in 1994 as a trading company working on wholesale and retail sale of locally produced and imported building materials.
Shipping is our responsibility.
The delivery of the material to the facility you are working on is our responsibility. We offer delivery to the point where you are working, we do the unloading in case it needs to be insulated from the rain, and we insulate the material.
Shipping in small and large quantities.
We make both small and large deliveries depending on several options.
- In case we connect a route with 2-3 stops, we offer minimal deliveries.
- In case of a 1-2 day wait, the route is completely completed and we bring the delivery closer.
For large quantities over long distances: - We also ship to distances further than our warehouse, depending on the agreement.
- We also ship materials outside of Macedonia, depending on the agreement with the client.
Related products
Mase veterrafshuese N XS e shpejte
Parametrat teknik
-Dendësia e masës së thatë të papërpunuar: 1900 kg/1m³.
-Fortësia ndaj presionit (pas 28 ditësh): CS IV, ca. 8.0 N/mm².
-Thithja e ujit: W0.
-Temperaturat për punim: +5°C - +30°C
-Koha e punimit në enë: Deri 15 minuta pas përzierjes.
-Trashësia e shtresës: Prej 6 deri 30 mm.
-Përzierja me ujë: Мe rreth 6.3 l/25kg.
-Ngjyra e materialit: Gri
-Paketimi: 25 kg.
-Afati i magazinimit: Në paketim origjinal 12muaj, në depo pa lagështi.
Pevalit Fuga mass F bs
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 20 minutes.
– Work temperatures: +5°C – +30°C.
– Resistant to temperatures: -20°C – +80°C.
– Norm: SG2, based on EN 13888.
– Walking on tiles: After 8 hours.
– Mixing with water: approximately 4 min., with around 0.55 1/2kg.
– Packaging: 2 and 5 kg.
– Material color: According to catalogue.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
Pevalit Fuga mass
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 20 minutes.
– Work temperatures: +5°C – +30°C.
– Resistant to temperatures: -20°C – +80°C.
– Norm: SG2, based on EN 13888.
– Walking on tiles: After 8 hours.
– Mixing with water: approximately 4 min., with around 0.53 l / 2kg.
– Packaging: 2 and 5 kg.
– Material color: According to catalogue.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P XS
Technical Parameters
– Working time in container: Up to 15 minutes after mixing.
– Working time: Up to 10 minutes.
– Work temperatures: +15°C – +30°C.
– Resistant to temperatures: -35°C – +100°C.
– Norm: C2FT, based on EN 12004.
– Walking on tiles: After 3-6 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 6 hours.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: White.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P3 W g&m
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 30 minutes.
– Work temperatures: +5°C – +30°C
– Resistant to temperatures: -30°C – +100°C
– Norm: C2FE, based on EN 12004.
– Walking on tiles: After 24 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: White.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P3 S1
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 30 minutes.
– Work temperatures: +5°C – +30°C
– Resistant to temperatures: -30°C – +100°C
– Norm: C2FE – S1, based on EN 12004.
– Walking on tiles: After 12-16 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: Grey.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
Pevalit P1 Extra
TILE ADHESIVE
Application
– Is distinguished with a greater timeframe for working and corrections, up to 30 minutes.
– Used for the adhesion of ceramic tiles, with larger weights and dimensions.
– On surfaces of walls or floors in indoors ambients.
– Certified with C1T class, According to EN 12004, Rap.No. P 920/05-410-4.
Reviews
There are no reviews yet.