Pevalit Fuga mass F bs
€6.00
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 20 minutes.
– Work temperatures: +5°C – +30°C.
– Resistant to temperatures: -20°C – +80°C.
– Norm: SG2, based on EN 13888.
– Walking on tiles: After 8 hours.
– Mixing with water: approximately 4 min., with around 0.55 1/2kg.
– Packaging: 2 and 5 kg.
– Material color: According to catalogue.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
Application
-Material with high hydrophobic and flexible features.
– Used for grouting tiles from ceramics, porcelain, granite, marble, stone, mosaic-glass, etc.
– For grouting tiles in swimming pools, terraces, balconies, showers, baths, etc.
– Indoor and Outdoor environments.
– For use on walls and flooring.
– Recommendation that the width of the grout not exceed 8mm.
– Characterized by good application, easy washing and good penetration capabilities.
– Material should be used only after PEVALIT tile adhesive has been dried, as to not affect the color of the grout.
– Certified in CG 2 – class, by norm EN 13888.
| Weight | 2 kg |
|---|---|
| Materiale per pllaka | Fuga per pllaka |
You must be logged in to post a review.
PEVALIT was established in 1994 as a trading company working on wholesale and retail sale of locally produced and imported building materials.
Shipping is our responsibility.
The delivery of the material to the facility you are working on is our responsibility. We offer delivery to the point where you are working, we do the unloading in case it needs to be insulated from the rain, and we insulate the material.
Shipping in small and large quantities.
We make both small and large deliveries depending on several options.
- In case we connect a route with 2-3 stops, we offer minimal deliveries.
- In case of a 1-2 day wait, the route is completely completed and we bring the delivery closer.
For large quantities over long distances: - We also ship to distances further than our warehouse, depending on the agreement.
- We also ship materials outside of Macedonia, depending on the agreement with the client.
Related products
Masat veterrafshuese N Bs
Parametrat teknik
-Dendësia e masës së thatë të papërpunuar: 1830 kg/1m³.
-Fortësia ndaj presionit (pas 28 ditësh): CS IV, ca. 8.0 N/mm².
-Thithja e ujit: W0.
-Temperaturat për punim: +5°C - +30°C
-Koha e punimit në enë: Deri 15 minuta pas përzierjes.
-Trashësia e shtresës: Prej 6 deri 30 mm.
-Përzierja me ujë: Мe rreth 6.3 l/25kg.
-Ngjyra e materialit: Gri
-Paketimi: 25 kg.
-Afati i magazinimit: Në paketim origjinal 12muaj, në depo pa lagështi.
Pevalit Fuga mass
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 20 minutes.
– Work temperatures: +5°C – +30°C.
– Resistant to temperatures: -20°C – +80°C.
– Norm: SG2, based on EN 13888.
– Walking on tiles: After 8 hours.
– Mixing with water: approximately 4 min., with around 0.53 l / 2kg.
– Packaging: 2 and 5 kg.
– Material color: According to catalogue.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P3w S1
Technical Parameters
-Working time in container: Up to 2 hours after mixing.
-Working time: Up to 30 minutes.
-Work temperatures: +5°C – +30°C
– Resistant to temperatures: -30°C – +100°C
– Norm: C2FE – S1, based on EN 12004.
– Walking on tiles: After 4-6 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: White.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P3 W g&m
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 30 minutes.
– Work temperatures: +5°C – +30°C
– Resistant to temperatures: -30°C – +100°C
– Norm: C2FE, based on EN 12004.
– Walking on tiles: After 24 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: White.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P3 S1
Technical Parameters
– Working time in container: Up to 4 hours after mixing.
– Working time: Up to 30 minutes.
– Work temperatures: +5°C – +30°C
– Resistant to temperatures: -30°C – +100°C
– Norm: C2FE – S1, based on EN 12004.
– Walking on tiles: After 12-16 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: Grey.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
P midiflex
Technical Parameters
– Working time in container: Up to 6 hours after mixing.
– Working time: Up to 30 minutes.
– Work temperatures: +5°C – +30°C
– Resistant to temperatures: -20°C – +80°C
– Norm: C2TE, based on EN 12004.
– Walking on tiles: After 24 hours. Measurements are based on temp. around 22°C.
– Walking on tiles with weight: After 4 days.
– On layers of plaster: PEVALIT-Tiefgrund LF is used.
– Mixing with water: approximately 4 min., with around 24 % water / 25kg.
– Packaging: 25 kg.
– Material color: White.
– Best before: In the original packaging 12 months, in a warehouse without moisture.
Pevalit P2
FLEXIBLE TILE ADHESIVE
Application
– For surfaces of outdoor and indoor environments, for example terraces, balconies, facades, etc.
– Tile aandsion over layers of flooring with central heating system.
– Used for porcelain tile aandsion, artificial granite, concrete tiles, stone, ceramics, etc.
– Extruded polyurethane (Styrodur) adhesion, in thermal insulation facades.
– Has good durability against high temperatures, frost and moisture.
– For use on walls and flooring.
– Used to repair damaged surfaces, with thickness up to 8 mm.
– Certified in C2TE class, according to norm EN 12004, Rap.No. P 920/05-410-5.
Reviews
There are no reviews yet.